Printed with anycubic Photon
RESIN: Photocentric DLP Clear Firm 70€/Kg
LZ: 50µ / LE: 20s / BL: 8 / BE: 120s / OT: 6.5 / RT 22ºc
Print Time: 3h40min
Cleanup: Quick IPA Squirted
Post Cure: UV nails 1hr
Post Cleanup: IPA submersion (quick, shaken)
Smell: No Smell
*************************************************
Model: Thinguiverse Lara Croft (H0) scale
---------------------------------------------------------
Slicer: Anycubic ChiTu
Supports: In software manual supports
*************************************************
Took some studio Photos at home, in the unpainted model you can see the 50µ cubes the printer produces
:)
These are the Photocentric Clear good settings for my Photocentric Clear Resin.
Like I had said before i felt the resin was being overexposed so i dropped another 5 secs from the minimum time i had calculated with my resin test plate STL Hack.
The plate multiexposure reveald that the minimum time to develop a 50µ layer was 5x5s exposures (25s) so i sarted with 30s to be on the safe side, turns out 20s is great.
The resin post cure process is good since the uncured resin has a greenish tint to it, and once fully cured it gets transparent
Hope this is of some help to others