A quick guide to all those print settings and what they mean.
Hi Photonsters and welcome to your new addiction.
It does not help that when you read the manual it uses the terms I have Placed in brackets here and when you hit the cog to see the settings during a print it uses other terms Not in brackets in this guide, So i have put them both here to try and make it more clear for you guys.
To help you get started let's explain those pesky setting, Yes even the obvious ones just to clear it up once and for all
:D
Bottom Exposures (Bottom layers): this is how long the UV light will turn on to set the layer of resin that is on your build plate for the first few layers (it's extra long to give the resin the best chance to stick to your plate and form a super hard base to help keep your part from wobbling and rocking about)
Bottom layer: (Bottom layers) simple, this one it's about how many of those super hard base layers to lay down on the base of your print usually this is 5-8 layers.
Normal exposures (Normal exposure time) : After your base layers have finished this is the time the UV will be on to cure all the rest of the layers of your print and will always be lower to your base layers setting it can be looked up in the excellent settings chart compiled by
Artur Fuste
that you can find in the files section of this group.
then we come to the mysteriously named Exposure off (Off time) . "Whatever can this mean?" I hear you ask, "Tell us Flint tell Us.", Well since you asked so nicely it's the amount of time the plate will wait at the bottom of a cycle (Pressed down on the FEP sheet, in the bottom of your vat) Before the UV light comes on for the next exposure longer times leave more time for the resin to settle out and form a flat layer.
OK think that's everything now stop lollygagging about here and go make cool stuff!!!
翻譯年糕