Anycubic Photon Printer Owners 造訪社團 » 用戶發文

Update on yesterday's issue. I'm pretty sure it's something to do with the LCD.

I ran a couple of smaller prints in the same resin, same settings etc and ended up with some gunk left in the vat. Partly cured weird lump directly above one of the parts in the centre of the bed. Ran another print making sure to leave the centre clear, still ended up with a lump of gunk.

Ran a very small print right in the centre, no gunk.

Then ran the base print again last night and woke up to this. Some very strange layers that cannot be a result of the print wobbling and a massive lump of gunk in the vat. It did make it a little further than the last print but only by about 8-10mm.

Any suggestion fine folks of the Anycubic group?

翻譯年糕

I wonder if anyone can shed some light on this for me.

Twice now this print has sort of stopped half way through. Part of the print has a clean line where the next layers haven't stuck but part of it seems to have tried. The rest of the print is then stuck to the FEP. This portion stayed on the build plate and the whole print is a uniform thickness the whole way up so I can't think of a reason why it's done this.

翻譯年糕

Finally got off my arse and did some painting.

翻譯年糕

Teaching myself Blender

翻譯年糕

Can anyone who sculpts with a graphics tablet please give me some recommendations for beginner level but not too cheap, I want it to last and be good but not pay through the nose for something I won't be using everyday.

Good brands? A good size to aim for?

Preferably from amazon but not required.

翻譯年糕

I'm looking to pick up a spare Vat for making resin changes easier, is there anything better out there than the official one?

Or a cheaper option to buy than £40 on Amazon? There is no rush so delivery time isn't neccesarily a priority.

翻譯年糕

Hey Photonsters, HELP PLEASE

I have been printing happily for a month now with no issues, not perfect prints but no major issues.

The printer was rested for a week and now when i'm trying to print i'm having some issues. I wanted to check my printer for z-wobble etc as i'm about to do some more precise prints so I ran the 'not a cube' test file from the group.

Disaster, the file printed but about half way up the printer appears to be curing sheets across the vat interconnected with the print. It left an ungodly mess on the FEP which I then tore trying to clean. Resin also appeared to seep under the FEP onto the screen and cure there too.

I changed the FEP, cleaned the screen etc and thought I was sorted. Also changed USB sticks and resliced the file.

The next attempt at the 'not a cube' was a similar fail but not quite as bad, the Vat also 'stuck' to the printer when trying to remove it. Although there is no residue underneath the vat or on the screen to account for anything sticking.

I cleaned up and thought i'd try a different file that I have succesfully printed before and I had the same problems, again not quite as bad but the problem is there.

Can anyone give any pointers or is it worth returning to Amazon and getting a fresh printer. As you can see from the photos the first half of the prints came out great (again not perfect but good enough for now) and the issues started higher up. As a chance both files are exactly the same number of layers so I would have though the error would come at the same height but apparently not.

Thanks in advance for any pointers

翻譯年糕

I wonder if I could borrow the collective intelligence of the group.

I am getting some extra lines at various levels on my prints. These 2 planters were printed at the same time and they both have additional lines not present on the file. The 2 larger areas appear to be a coarser line at regular intervals that I can't figure out and the smaller patch in the middle is quite messy but only appears on that side, not the other side at the same height.

Any ideas please.

翻譯年糕

Hey Guys, I wonder if you can help me out with something.

When I set up the supports in Photon Slicer there is a definite gap between the model and the support, however when the print is done some of the supports have joined to the model leaving ugly marks when cleaning it off. I'm talking about the stem of the support not the tip.

Could this be due to overexposure. I am using 12s standard layers on Anycubic Translucent Yellow. 0.05mm layer height.

Thanks

翻譯年糕

Can you guys help me read this. I'm thinking the 25um should be the 7 and the 50um should be 8-9. I would love some other opinions though

翻譯年糕