Anycubic Photon Printer Owners 造訪社團

Hi is this normal amount of movement and if not how do I fix it thank you.

翻譯年糕

Hi, recently I bought this resin, but I don’t know, what parameters I need to use, especially because it’s the “STANDARD“ , only I get the parameters for other product of the same brand....if someone can help me I will be very gratefully, thank u!

翻譯年糕

Curved but good detail

翻譯年糕

Test prints, Monocure Clear Rapid. Takes a bit more per layer as it needs 12.5 secs in my case but the results are fairly decent. ?

翻譯年糕

evening all, ive just finished running a print that has failed in places. It looks to me like the supports havent formed correctly in places. from what i can see its only the two models that have failed everything else appears to have worked , can anyone advise on what might be happening and how o correct it for the reprint?

翻譯年糕

So my Mr Bean level comedy of errors continues.

I used the square print to successfully remove a bit of resin that refused to lift from the FEP. Turns out that my previous attempts to remove it had punctured the FEP and its successful removal created a tiny leak in the FEP which has now led to a small patch of (clear) resin stuck to the screen.

So while I wait for the replacement FEP to arrive, is there anything I can do about a thin coating of resin on the screen or is that now a permanent feature of my printer?

翻譯年糕

so after some troubles with some prints, then trouble with the printer itself, I can once again print!!!!

翻譯年糕

Having some trouble getting a good print for this part. The first three pictures are the first attempt. I tried printing it directly on the build plate but it didn't completely adhere on one side which made it warp. The second attempt I raised from the platform with supports but didn't angle it. It lifted at the same place, and the surface finish isn't going to be good enough like this. The part needs to be printed solid and both faces need to be perfectly flat. I have re-levelled my bed and flipped the part so the face with the teeth is on the build plate, have left it at work to print overnight and will be able to see if that worked in the morning. Any suggestions to get this to print successfully if it doesn't work? Thanks.

翻譯年糕

Hello guys. I'm considering buying the photon. With transparent resin, what results are obtained? Im interested to print parts similar in photo.. Its possible?

翻譯年糕

I'm about to crack open a new .5 liter of Anycubic Yellow resin. I don't see an entry on the google spreadsheet for best resin settings for this resin. I'm thinking that it might work with settings similar to the Anycubic Green. Does this make sense as they're both somewhat translucent.

Or are there better settings to be found for yellow?

Thanks

翻譯年糕