Anycubic Photon Printer Owners 造訪社團

In a month or so I am going to start an 'epic' project'- a full conversion of the Hasbro Hero X-Wing. Anyone that isn't familiar with this impressive guy it's 30" nose to engine exhausts and 24" wing tip to wing tip. I won't be printing the fuselage but I will be printing pretty much everything else. Needless to say most of the parts are bigger than the build plate.

I have the STL files, but at this time I don't have the knowledge or skills to cut the pieces into sized that will fit and add connection tabs so I can put everything back together. Ideally the wings should be cut at a natural seam/hull line so the seam looks natural. Is there anyone out there that can do this? I will pay for this service as long as it's not an arm and a leg... otherwise I'll have to wait until I acquire the skills myself.

翻譯年糕

I'm going to do a print that may (or may not) use all the resin in the vat. Is it safe to pause the print, raise the build plate, add more resin, and then resume the print? Will it auto resume and lower the plate to the right height to resume the print?

翻譯年糕

So WARPAGE and SHRINKAGE...HAS ANYONE figured out the cause for these issues. Warping off the build plate and stuff? Mono Rapid clear .05 12 1 100 8

翻譯年糕

This is awesome! My 89 dollar sticker came with a free liter of resin! ?

翻譯年糕

My photon was DOA. Can't do the UV detection test...Is there anything I'm missing before I return it and get a new one?

翻譯年糕

Well that's something. I didn't see the horizontal lines until after priming. So it appears I have a z issue of some sort. Which fix worked for people with this issue?

翻譯年糕

where can i get a replacement for ANYCUBIC Photon 2K LCD screen

翻譯年糕

Having probably the same issues as everyone else... printer stopped printing. After six successful prints, using the translucent green resin that came with the printer, default settings, items are sticking to the FEP, but that's about it. (can see the outline of the supports in the resin, but it stops there.) Tried re-leveling (Flint way) and still not working.

I stripped down the machine, cleaned the vat, build plate, checked the LED, strained the translucent green resin, refilled vat, tried to print on default settings that have previous worked, and same issue. Did the same thing referring to the excel sheet online, upping the exposure rates by five, and still nothing.

Finally, re-cleaned everything, leveled using Anycubic instructions, changed resin to Anycubic translucent yellow (no excel reference), added a raft under the print, and still no success.

Thoughts?

翻譯年糕

LCD

UI 2.8