ATOM 3D Printer Group 造訪社團

I like it! did you designed it or you downloaded it?

Both. The original part was designed by someone else here and just had the knife holder. I printed the out and it worked great. So then I added the part to hold the gluestick. But I made the hole slightly too small - so on my second attempt I got the hole size correct and added the little hole for the hes wrench.

I also made another part that is a filament spool holder:

(I really don't like this posting editor software.)

Here is the posting showing the spool holder:

https://www.facebook.com/groups/atom3dp/permalink/1607016586203297/

I will upload both of these to Thingiverse now; you should be able to find these if you do a search for Atom2.

yes, unfortunately that is how KISSlicer's support function behaves. No matter the density you set, it will always create a denser support to interface with the object when it gets to just a few layers in proximity

真的很可惜 這個是 3D SCANER 對嗎

是Ciclop 無誤... 看來有望可以用啦...
該有的結構目前觀察都正常形成了..
推測也可能回抽過度造成....

之前NG的

上次的活動小狗我第一次也是用Meshmixer去算支撐，情形更慘，開花兼斷掉，不到1/5我就停止了

失敗那麼多呀 暈倒

我也苦惱 那個 培林 那兒能買到

NG的那時打出TMC2100搭起來加速度失速問題的樣子..
後來換步進馬達重新調整才恢復(也可能宇揮操一年下來有一軸老化故障了)

那是正常的，我也一大堆廢料

我只有那個 轉盤 印3次 其他的 都1次就 OK

我培林後來露天看到有人賣250就買了
台中旱溪那邊的軸承店不知道有沒有?
掏可能要特貨

主要是一堆20cm長的..尤其是這個不是要拆就是要立起來..
不然原設計的內建支撐是不錯用的

好的 感恩 您的訊息 只差這件 哈 3Q

http://www.thingiverse.com/thing:804688

我是躺著印，開支撐

我是躺著印，開支撐

那要加大atom or i3了

轉成對角印看能不能塞下去

圓床還有對角可轉？！ ?

XD

沒注意到是圓的==

自製掃描器耶

這檔案躺著印ATOM可以的,我印過210x130mm...

我有次印210mm極限結果掉桿，所以要看圖檔吧

請問此掃瞄器哪找的到相關資訊呢？謝謝。

http://diwo.bq.com/en/presentacion-ciclop-horus/

https://www.facebook.com/photo.php?fbid=968880549790159&set=gm.829684620402465&type=1&theater

是春天到了~ 所以要開花~

其實是顆花椰菜...
https://plus.google.com/....../6144596756536903409......

great~

pretty machine!
pretty girl!

Thank you!!! :3

Good luck with the faire!

we currently don't.. it's a good slicer, the only problem is that it takes about 10 times longer to slice something.. so we gradually moved away from it.

I experimented with all the slicers before my Atom2 arrived. They all have their pros & cons of course. Kisslicer is the one recommended here and is the one I use exclusively. The other one that I also like is Craftware, but so far I've found bugs in i t that make me stay with Kisslicer.

Those bugs may have to do with how I have been generating my models and subsequent STL files. I'm just starting to get up to speed on issues like manifold models, naked edges, etc.

The nice thing abotu Craftware is it has by far the best on-screen visualization of what the generated GCode is going to do. This is very helpful in determining what the actual printed part will look like, and if there are errors or corrections needed before actually printing.

Another Craftware nicety is it's ability to save, export, and import all it's parameters via a single data file. This makes it easy to have different sets of parameters for different types of printing. Kisslicer keeps it's parameters in 4 different INI files, plus a 5th STL file that shows the current print bed.

正常的啊，沒有這個突起的話軸承會直接摩擦到底

軸承只是輔助進料順暢而已，擠出輪沒對到進料孔，才會有卡料的風險

軸承要對心幹嘛...?

你可以把那一圈用銼刀磨掉TRY TRY 看(不負責任建議)

那軸承不就卡死，PLA線阻力變得更大，變得更慘

正解

可以形容一下卡料的狀況嗎

看這個沈孔鎖的痕跡，你可能把這個手臂鎖太緊囉！這顆螺絲不能鎖死，讓手臂可以自由活動才不會夾不到料

後來重組ㄧ次，目前正常列印中

本來是以為左右兩邊的料孔中心不對稱造成積料⋯

你有用一小段PLA去測試，料孔與擠出輪相關位置嗎

有啊，之前的現象是剛開始正常，過ㄧ段時間後會積料在擠料輪的左邊⋯

重點是擠料輪的凹槽要對準洞口，這樣就ok了

沒錯，這是重點⋯

筆記

https://plus.google.com/112554621176738250186/about......

https://hackpad.com/-maker--iroHZQednLm