Anycubic Photon Printer Owners 造訪社團

Hi everyone! I have a Hugo upset my z axis don’t stop at home position... it seems that want to continue go down... so i can’t print anything!
Anyone knows what happens?
Many thanks

翻譯年糕

anyone have any idea whats going on i had this problem updated the firmware got one print out of it and now the problem is back ive tried older firmware but noting

翻譯年糕

Totally silent printing with my 60mm Noctua fan update in the base of the printer...

The noise you can hear is my PC the other side of my desk!

翻譯年糕

First leak :(

翻譯年糕

What is wrong with Chitubox 1.4.0.. i have no texts in the menus and buttons...

翻譯年糕

Couple of 36mm Daleks in Blu.

Working with those weapons (they print separately) is difficult even on FDM prints. On the Photon at these sizes... oof.

The model (from Thingiverse -- not mine) has attachment holes so you can push the arm/eye/weapon in later on (print in a different colour and makes it easier since they're fragile and break). I used a drop of Blu on a toothpick in each hole, put the appendage in, and then cured it with a small 100 mW UV laser pointer (405NM).

翻譯年糕

So, sometimes the Photon FIle Validator just won't work. It just says Complete but doesn't do anything and the fix option isn't available. Can't find a consistent reason why.

翻譯年糕

<> One Week as Noob <>
Hello Makers !
I received my photon last saturday and i'm very satisfied with this Printer.
.
As first, I need to check Chitubox and find a good setting for my Anycubic Skin Resin.
> 0.05 / 8 layers / 10s Expo / 65s Base / 1 Extinction
> 0.035 / 10 layers / 14s Expo / 80s Base / 1 Extinction
.
I did the leveling only few time and it was quite easy.
.
My process is the following :
> Chitubox + Object : If a big one > Heavy Support / If reasonable object > Middle Support.
I enforced the support to be stronger and hollow the part all the time.
> After print > Cleaning with IPA and Denaturated Alcohol (cheaper and working fine). I bought a cheap ultrasonic cleaner and put the part for 6 to 12 minutes in a proper IPA bath.
> Cut Support before cure the object... more easier.
> Dry the print with Aerograph !
> Cured by Sun in metallic little box.
.
So, i did not consumme a litter of resin for the moment but it should be done in few hours lol.
A bad experience was cleaning supports of a cured object and a spot directly comes to my eye... A very bad moment... But after washing it with special water, the little resin spot went out without damage.
So, I will never never never... remove support without Glasses. Please take care.
.
Additionnal cost :
- Ultrasonic Cleaner 30€
- Nails UV system 20€
- Denatured Alcool 2€ / Liter
- Protection glasses 10€
- Patreon addicted... 10€ x2
.
A good surprise was the ring stuff with resin. They look really cool and i need to learn how to paint them and how to apply a paint who can be on skin contact an entire day.
.
I would say than Printing Resin is not the same than FDM systems but if HELL is on Earth, he should be incarned in a Support !!
Supports are a pain in FDM World and Supports are a pain for Resin lol... I should improve this :)
So, i'm still a noob... I think my next step in FEP replacement but for the moment... Need to find Clear resin to try.
.
Have Fun :)
GuiGui

翻譯年糕

Would you guys mind sharing your support settings for Chitubox? I keep getting little divots when removing supports
.

翻譯年糕

Hi everyone. My photon worked well for 6 weeks. Now it prints for one hour and then stops and give errorcode T_88. I have tried updatieng firmware and reconnecting the cable to the LCD screen.
Please help

翻譯年糕