Anycubic Photon Printer Owners 造訪社團 » 用戶發文

Trying mean green and it left a lot of residue and may have even discolored it. What am I doing wrong? Using an ultasonic puck in the bath. Gave it about 5 min, then rinsed in warm water bath still with the ultrasonic puck for about 5-10 min.

嘗試mean green, 留下了很多殘渣, 甚至可能已經發現它. 我做錯了甚麼? 洗澡時用超音速冰球. 給了它大約5分鐘, 然後用超聲波冰球在熱水澡中洗了大約5-10分鐘.

· 查看原文 · 為此翻譯評分

What is happening here? The only difference between the first and the second is I switched the place of the models and moved them a little further out from the center. Since the support bases printed then parts above printed it can't be a dead spots. Would loose FEP cause this?

這裡發生了甚麼? 第一個和第二個的唯一區別是我把模特的位置換了, 把它們移到中心的地方. 既然印出了支援基地, 那麼上面的部分印制就不可能是死掉的地方. 失去fep會導致這個嗎?

· 查看原文 · 為此翻譯評分

Thoughts on what went wrong here. The supports on the legs are the same and the model is at a consistent angle. But one toe and leg is mangled while the other is perfect. Checked the lcd and all is good no dead spots. My son is happy says it looks like battle damage just want to avoid more "accidental weathering".

思考這裡出了甚麼問題. 腿上的支撐是一樣的, 模型是一致的角度. 但一隻腳趾和腿被磨損, 另一隻是完美的. 檢查了lcd, 一切都很好, 沒有死亡地點. 我兒子很高興說, 戰爭破壞只是想避免更多的"意外 風化".

· 查看原文 · 為此翻譯評分

What the heck. It is like it printed the supports just way too late. The print appears to be have come out perfect except maybe some fusing (except I had the top of the legs on backwards ?‍♂️ ).

搞甚麼鬼. 就像它列印了支撐太晚了. 指紋似乎是完美的, 除了一些引信(除了我的腿頂部向後 ? ♂️ . ♂️

· 查看原文 · 為此翻譯評分

Really starting to get the minis dialed in. Designed these with the help of my kids (they picked the parts they liked). Fully custom one off tech priest dominus and wolf lord.

真的開始把迷你撥號了. 在我的孩子們的幫助下設計這些(他們選擇了他們喜歡的部分). 完全定制一個技術牧師dominus和wolf lord.

· 查看原文 · 為此翻譯評分

Miranda Lawson from Mass effect. Pretty happy with the sculp and the print. Maxed out my height for the first time on this one.

[質量效應]的米蘭達·勞森. 對雕塑和印刷品很滿意. 第一次把我的身高弄出來.

· 查看原文 · 為此翻譯評分

Just made my first mini I am happy with. Didn't like the scale of the model so I put in mesh mixer and "heroiced" it. Increased the size of the legs, arms, and swords. Since these are meant to be my kids first army they needed to be a little more durable so I also removed the smaller hangy bits. I think the end result looks pretty good next to the real thing.

剛剛做了我很高興的第一個迷你. 不喜歡模特的尺寸, 所以我放進網格混音器和"英雄"它. 增加腿, 胳膊和劍的尺寸. 因為這些原本是我的孩子第一軍, 他們需要更耐力, 所以我也刪除了小的小部分. 我認為最終結果在真實的東西旁邊看起來相當不錯.

· 查看原文 · 為此翻譯評分

Update: it is working again after leaving it unplugged over night. What I think happened was after aborting my last print I pulled the USB before it was done the full abort cycle so the file was stuck in whatever cache is in the printer. I did unplug the machine before but must not have left it unplugged long enough.
Need some help. I unplugged my USB from my printer and the screen showed some error about the USB being removed (I like an idiot did not take a picture of what it said). But as I had just removed it I just closed it and moved on. Now my printer will not read the files on my USB. It detects them but when I click print it says failed to open file. I have tried 2 USB stick that were both working using files that worked before, I am running 5.0.2 firmware version. Time for a service ticket or has anyone seen this before and knows how to fix i?

更新: 它在晚上拔掉插頭後, 它再次起作用. 我想發生的事情是在取消我的最後一張列印後, 我在完成整個墮胎週期之前就拔了usb, 所以檔案卡在印表機里的任何快取中. 我之前確實拔掉了機器, 但肯定沒有把它拔掉足夠長的時間.
需要一些幫助. 我從印表機拔出了我的usb, 螢幕顯示了一些關於usb被移除的錯誤(我喜歡一個白癡沒有照). 但是, 我剛剛刪除了它, 我剛剛關閉它並繼續前進. 現在我的印表機不會讀到我的usb上的檔案. 它檢測到它們, 但當我點選列印時, 它說無法開啟檔案. 我試過2個usb棒, 這兩個都在使用之前工作的檔案, 我運行5.0.2個固件版本. 該買張服務票了, 或者有人看過這個, 知道如何修復我嗎?

· 查看原文 · 為此翻譯評分

Not saying my FDM printer is bad but dear God look at the difference. I can count his little rat fingers. This is a lamp base for a collaboration I am working on with another artist.

不是說我的fdm印表機不好, 但親愛的上帝看看區別. 我可以數他的小老鼠手指. 這是我與另一個藝術家合作的燈基地.

· 查看原文 · 為此翻譯評分

First attempt at printing a mini. Grabbed this off cults but the scale feels wrong. I am trying to print proxy minis for my 7 year old to start warhammer 40k so when he breaks them or paints them horribly it doesn't make my wallet scream in agony. Can anyone tell me the height they would print this at for gaming? His posture would put his height to scale with my real figures but it just feels wrong. I might be crazy being a primary Ork player so being used to hulking figures.

第一次嘗試印刷迷你. 把這個從邪教那裡拿出來, 但規模感覺不對. 我試圖為我7歲的孩子列印代理迷你, 開始warhammer 40 k, 所以當他打破了它們或塗上可怕的時候, 它不會讓我的錢包尖叫. 有人能告訴我他們會在遊戲時列印這個的高度嗎? 他的姿勢可以用我的真實數字來調整他的身高, 但感覺不對. 我可能很瘋狂成為一個主要的ork球員, 所以被用於模仿人物.

· 查看原文 · 為此翻譯評分