ATOM 3D Printer Group 造訪社團

就... 出料不順！ 然後之後又順了... 要檢查一下 喉管 或者 擠料輪看看...

線捲不順

我之前印的也有一條粗粗的，可是摸不出來，但看的出來。

好像是跟 槽 有關係...

前面微動螺絲可能跑掉了，或者上蓋放鬆點...

https://atom3dp.squarespace.com/firstlayer-2/
看一下E
還有確定上面的訊號線等沒有收太短..

懷念cnc的日子

可能是為動開關 線or pin接觸不良 前一陣子剛預過

Delta機型的自動校正常常會跑掉
機械式開關也有精準度問題
暑假來改裝看看接近開關@_@

http://gsyan888.blogspot.tw/....../3dp-bed-auto......

微動開關靈敏度好像變差了,以前感覺不是這樣

線檢查ㄧ下看看

微動開關螺絲調一調

槍托 握把 上下護木

猴...猴腮雷呀~

伐龍的利器無誤! 超有高殺傷力，對人沒有用，對龍反而有效~

哇！ 看起來很重～

哇，妹拿起來好大一把。

好誇張的大啊～～～

大神就是專業

性感警長~

圓來那隻是你印的~~ 今天有看到

成品有再做打磨、上色嗎，還是直接使用同色料印出來而已??

M3 M4螺絲台中應該google一下有不少螺絲行..
T型就比較難找了...

https://www.facebook.com/snake16826
網路上買過這間...在大里
這間看來也有進T型螺帽

萬豐螺絲行：豐原區中興路23號
我都在這邊買，但T型螺帽沒問過

沒什麼實用性

看起來像類似3D列印筆

try this : https://atom3dp.squarespace.com/mechanical-problems-1/#head1
also when auto leveling slow down the speed to 10%...

Are you trying to print their test print stls or your own?

Also, the auto leveling works just like the instructional video?

https://www.youtube.com/watch?v=wEZZWE5xgHk

Ive been using this printer for 8 months with no issue! i know how to adjust the auto level screw!! this is a code issue... does anyone know of a customer support contact for Atom printers or do they just not care about thier product after selling it??

u can email to support@atom3dp.com.
also record a video for your problem.

I suggest not typing exclamation points to people trying to help you. It gives the impression you're yelling.

If it's a code issue, why would it be their (Atom's) problem then? That sounds like a problem in your g-codes. Do you have any old g-codes you know for a fact worked before you had this problem? Do they also too not work?

I agree - it sounds like GCode problem. Post the first 20 lines or so of GCode that results in the problem. That should tell the story.

ill try that next time!!!!!!

ill try and grab the code and post it on here tomorrow! thanks birk for the idea and help

Yinka im here to ask anyone if theyve seen this issue before!!!!!! i have tried old and new stl files, uninstalled and re-installed Cura many times with no avail! if you seriously have no constructive help or suggestions then bitching at me about excla mation points really isnt going to help! im frustrated with Atom for not setting up before manufacturing a product a customer service line for unknown issues like this one! i have every right as a consumer to be frustrated even though in the end it was my fault for purchasing this item!!!! and if it is a gcode issue then great ill jump on that troubleshooting first thing tomorrow but until then im on here asking for thoughts on fixing the issue, so if your not here to lend a hand just please keep it moving and keep your opinion to yourself

Ok, dude *sigh*

Use one of atoms test print stls and see if it happens still. If it does it's not a gcode problem

maybe your end stop sensor is broken.

Bryan Grude If you know how to use pronterface.
Try to send M503 command & get the result post it here.
Wondering if some setting abnormal in EEPROM .

Bryan Grude I understand your frustration about you shit not working properly. If you want anyone to help you stop behaving like a litte bitch and be polite. We are all makers and eager to help one an other. Now, have you tested with one of Atom's re ady made stl's? If this prints then it is not an issue with you printer. The issue is with your slicer/gcode writer. Please try one thing at a time and post your progress also the solution would be nice to hear about. Good luck.

guys, just bear him, i know that feeling when printer won't work.

Bryan - this kind of problem has been reported elsewhere a few times:

https://www.craftunique.com/forums/view-thread/1558

https://www.craftunique.com/forums/view-thread/1630

The end-stop sensor is not the problem - this sensor is not used during printing. In fact, once you have completed an Auto-Level (which does use the sensor) you could remove it and not know the difference.

he already quit this group.

well that is not a very smart move

What a baby...

so shame for find answer to help him.
he sent the mail to the Atom support.
i'll reply him and also explain about this group.
dont need to know chinese. just post the photo or video. that will be easier to solve issue.

Thx all. u guys so nice.

Birk I love your relentless dedication to solve problems. Thumbs up.

And just to make it clear. The Atom 2 is still the best out there. Happy printing!

這罐就是拿來塗這些地方的阿！！！
不然你想潤滑哪裡？？？ (誤

這可是神油ㄝ，現在都買不到了

想買。。。

之前不知道官方送的那條白色牙膏是鐵氟龍潤滑油時 我是拿潤滑矽油噴在金屬球上 也ＯＫ 所以應該只要是潤滑油都可以

上完油了~ 準備噴噴~~~

所以現在買不到了？

這一刻，Jacky 感動了~ 謝謝你們.......

那個不好用.....５０收～～～（嘿嘿嘿，限量是殘酷的）

露天有在賣噴霧式！

嘿嘿... 我已經全部喝光了~~~

一位maker界的大前輩馬爸，推薦一種球頭螺絲更好用的潤滑油叫做銅800，效果更好

不知道有沒有比較推薦好上的好用的油......

白色無法... 牛皮紙不錯

原來白色無法= =

白色無法反光，皮革和木頭雕起來滿好看

木頭燒了你就知道，漂亮

好的，感謝各位前輩，明天來試試

首先要確定你的對焦高度正確，帶眼鏡印測試檔，試著找聚焦光點最小的高度。另外白色要用很慢的速度燒，一旦受熱到開始變色就會急速燒焦，底下多墊幾層白紙比較安全，合適的速度要測試一下。

我燒完常常要拿起來對著日光燈才看的到痕跡, 雖然這樣有種密文的感覺, 但是我的雷雕似乎搞錯了甚麼 Orz

剛好也在昨天裝好,使用後的初步感想是:
1. 好慢
2. 不能跑向量啊啊啊啊啊啊,只能清掃雕刻的方式......... …… 查看更多

可以考慮自己換大一點的吧。

我這組是全自製。 …… 查看更多

耶~成功了，還滿好看的
但是要怎樣設定才能讓他切割東西呢...

其實精細度蠻好的

要先拉長 再擷取37mm

拉長...

我比較推用600磅砂紙磨一下能順順塞入就好,用拉的很容易失敗彎曲

加熱中塞入比較好塞，不會被硬化的雜質卡到

我長大了！！！

這一刻，Jacky 感動了~ 謝謝你們.......