• 3D列印服務
  • #maker+t=market
  • 1
  • 2

Anycubic Photon Printer Owners 造訪社團

原文網址 Eivind Husby
2019-09-06 21:42:58

I've been using a 75/25 mix of Monocure Rapid (Grey of Clear) and Flex so far, to get minis that are a bit thougher. It's been working quite well, but I wanted something that was as good, or better, cheaper, and didn't require me to mix things. Most of us have heard of Siraya Tech Blu, but for most of us europeans, it can be hard to get your hands on, and expensive when you can. I've had a bottle of PrimaCreator Value Resin laying around for a while now, but never got around to trying it before now.
This is my first test with printing some simple flying bases for tabletop ( https://www.thingiverse.com/thing:1599290 ).
I didn't really care about quality, as long as they worked, so I printed a batch directly on their side.
In this spesific case, I mostly just wanted to test thoughness anyway. Sacrificed one (with some failures) for a stress test, and I'm impressed.
This is printed at 0.05 at 8 seconds. Very over exposed along the connecting side. Running a complex mini atm, to see how it manages details.
If this holds up to all my needs, I can get it locally and pretty cheap, so fingers crossed.
I did also order a bottle Siraya Tech Blu, since I want to compare the two. 翻譯年糕

Matt Browne
2019-09-07 05:37:44

Brendin Emslie
2019-09-08 10:39:34

Jérôme Beyaert
2019-09-08 11:56:13

Eivind Husby
2019-09-08 17:04:59

Eivind Husby
2019-09-08 17:14:28

Eivind Husby
2019-09-08 17:20:19

Even-André Søiland Andersen
2019-09-08 18:56:01


原文網址 Daniel D'Intino
2019-09-06 21:25:33

Well I don't use gloves as often as I probably should.

But even though it doesn't smell bad, these resins seem to trigger my asthma big time ?‍♂️

Is it just me?

翻譯年糕

Richard Flanagan
2019-09-06 21:26:32

James O'Keane
2019-09-06 21:27:43

Chad Elstad
2019-09-06 21:37:44

André Nettermann
2019-09-06 22:23:58

Daniel D'Intino
2019-09-06 23:55:41


原文網址 Ofek Samsonov
2019-09-06 20:17:03

can i dye my clear resin a translucent blue colour and what might i use. thanks

翻譯年糕

Ofek Samsonov
2019-09-06 20:19:25

Andrey Feldman
2019-09-06 20:20:20

Rigo Arevalo
2019-09-06 20:23:23

Ofek Samsonov
2019-09-06 20:26:01

Jaco Norchie Nortje
2019-09-06 20:31:03

Jaco Norchie Nortje
2019-09-06 20:31:20

Chad Elstad
2019-09-06 20:36:22

Rigo Arevalo
2019-09-06 20:41:11

Fred Breton
2019-09-06 20:46:57

Fred Breton
2019-09-06 20:47:05

Fred Breton
2019-09-06 20:47:12

Fred Breton
2019-09-06 20:47:47

Ofek Samsonov
2019-09-06 20:51:38

Charlie Anderson
2019-09-06 20:57:40

Nicholas Hughes
2019-09-06 21:01:38

Nicholas Hughes
2019-09-06 21:02:23

Ironi R Johnson
2019-09-06 22:57:09

Ironi R Johnson
2019-09-06 22:57:56

Ironi R Johnson
2019-09-06 22:59:18

Rob McEwen
2019-09-06 23:51:41

Rob McEwen
2019-09-06 23:57:16

Ofek Samsonov
2019-09-07 00:02:23

Rob McEwen
2019-09-07 05:27:11

Ofek Samsonov
2019-09-07 05:28:59

Rob McEwen
2019-09-07 05:29:41

Rob McEwen
2019-09-07 06:54:33


原文網址 Ben Lord
2019-09-06 19:58:00

First test print successful. Now some sunbathing for the model and some coffee for me, because today I'm officially a 3D Printer. Woot woot.

翻譯年糕

Milton Maxson
2019-09-06 19:59:01

Ben Lord
2019-09-06 20:00:58

Adam Burch
2019-09-06 20:17:04

Stephen Brewer
2019-09-06 20:23:25

Mattia Pontini
2019-09-06 20:24:00

Ben Lord
2019-09-06 20:29:55

Shawn O'Hara
2019-09-06 20:44:50

Mattia Pontini
2019-09-06 20:46:07

Stephen Brewer
2019-09-06 20:50:14

Mattia Pontini
2019-09-06 20:53:38

Stephen Brewer
2019-09-06 21:02:09

Mattia Pontini
2019-09-06 21:06:24

Mike Stewart
2019-09-06 22:16:24

James Vincent Paquette
2019-09-07 20:19:18

James Vincent Paquette
2019-09-07 20:20:02

Ben Lord
2019-09-07 20:31:32


原文網址 Stephen Brewer
2019-09-06 19:41:29

Really happy with how this turned out. A couple of mistakes, and possibly too many supports (or maybe not, hah) but it didn't fail. Now to figure out how to support this giant bat...

翻譯年糕

Handrez Pintubola
2019-09-06 19:42:35

Matt Dowis
2019-09-06 19:43:32

Matt Dowis
2019-09-06 19:44:50

Stephen Brewer
2019-09-06 19:45:15

Dave Green
2019-09-06 20:02:08

Stephen Brewer
2019-09-06 20:05:51

Dave Green
2019-09-06 20:18:55

Stephen Brewer
2019-09-06 20:21:03

Matt Dowis
2019-09-06 20:52:22

Matt Dowis
2019-09-06 20:52:30

Dario DiZio
2019-09-07 01:07:29

Stephen Brewer
2019-09-07 01:29:35

Ric Watts
2019-09-07 02:01:49

Dario DiZio
2019-09-07 02:19:05

Stephen Brewer
2019-09-07 09:45:07


原文網址 Plamen Penev
2019-09-06 19:37:55

I've just printed the calibration files - resin-test-50u.B100.2-20 and Photonia in AC plant based resin. Photonia is printed at 50 um, 14 sec, 25 C. I will try it also at 12 sec.

翻譯年糕

Ofek Samsonov
2019-09-06 19:54:37

Dirk Gerrit Van Maarleveld
2019-09-06 21:05:59

Plamen Penev
2019-09-06 21:12:49

Plamen Penev
2019-09-06 21:19:53

Dirk Gerrit Van Maarleveld
2019-09-06 22:20:15

Vinicius Silva
2019-09-06 22:34:50

Plamen Penev
2019-09-06 22:55:45

Jose León
2019-09-07 03:26:01

Plamen Penev
2019-09-07 04:03:56

Jose León
2019-09-07 04:07:39

Suksan Prasert
2019-09-12 16:16:41

Plamen Penev
2019-09-12 18:31:15


原文網址 Simon Wilson
2019-09-06 19:27:56

With regards to shaking the resin before use, how long might it take to require another shake? I'm considering the time it sits in the tray if left overnight, would it begin to separate to the point it needs stirring or something?

I ask because I had a print fail completely, and rather than start altering settings I just poured out the resin, removed the jelly bits off the FEP from the misprint, cleaned the plate with IPA (not the irish pale ale) and got a perfect print using the same file.

翻譯年糕

David Seaman
2019-09-06 19:31:11

Scott Pavlich
2019-09-06 19:34:00

Simon Wilson
2019-09-06 19:35:05

Simon Wilson
2019-09-06 19:36:56

Simon Wilson
2019-09-06 19:39:03

Chad Elstad
2019-09-06 19:47:36

Simon Wilson
2019-09-06 19:59:11

Simon Wilson
2019-09-06 20:04:59

Scott Pavlich
2019-09-06 20:11:05

Chad Elstad
2019-09-06 20:12:16

Jon Carroll
2019-09-06 20:42:37

Simon Wilson
2019-09-06 21:47:50

Simon Wilson
2019-09-06 21:59:28

Simon Wilson
2019-09-06 22:00:38

Jon Carroll
2019-09-06 22:01:29

Simon Wilson
2019-09-06 22:08:35

Chad Elstad
2019-09-06 23:01:06

Simon Wilson
2019-09-06 23:03:27

Simon Wilson
2019-09-06 23:08:31

Chad Elstad
2019-09-06 23:59:35

Simon Wilson
2019-09-07 00:04:38

Sven van der Hart
2019-09-07 00:10:44

Chad Elstad
2019-09-07 00:12:32

Simon Wilson
2019-09-07 00:16:03

Chad Elstad
2019-09-07 00:17:52

Simon Wilson
2019-09-07 00:20:09

Simon Wilson
2019-09-07 04:22:50

Jon Carroll
2019-09-07 04:26:54

Simon Wilson
2019-09-07 04:33:04

Simon Wilson
2019-09-07 04:35:19

Jon Carroll
2019-09-07 04:50:36

Simon Wilson
2019-09-07 04:52:19

Simon Wilson
2019-09-07 05:41:52

Simon Wilson
2019-09-07 05:42:47

Sam Taylor
2019-09-07 09:08:34

David McGyver
2019-09-07 14:13:13

David McGyver
2019-09-07 14:14:33

Lena Marilyn
2019-09-07 16:19:09

Simon Wilson
2019-09-08 06:13:33

Douglas Rector
2019-09-08 06:19:28

Jon Carroll
2019-09-08 09:12:04


原文網址 Stuart Blair
2019-09-06 19:02:22

hey hive mind, I am debating updating firmware so i can get anti alias on my photon. Everything I have found seemd to be from august or earlier. Is it just a case of bunging the new firmware 4.2.19 on printer then ticking the anti alias box in chitubox (he asks naively)? thanks in advance :-)

翻譯年糕

Andrew Burton
2019-09-06 19:07:50

Jarrod Smith
2019-09-07 21:49:29


原文網址 Stefan Ritchie
2019-09-06 17:58:42

Nothing hugely impressive or remarkable, but this is the Anycubic Eco resin. I've then lazily hit it with some graphite powder to help the details stand out. I am still impressed by the level of detail this thing can churn out!

Model was bought on CGtrader

翻譯年糕

Greg Chapman
2019-09-06 18:36:02

Lee Baxter
2019-09-06 18:36:55

Zena Andreou
2019-09-06 19:35:42

Stefan Ritchie
2019-09-06 19:36:51

Stefan Ritchie
2019-09-06 19:38:32

Stefan Ritchie
2019-09-06 19:39:19

Ed Obarowski
2019-09-06 21:43:23

Neil Ramsay
2019-09-06 21:51:53

Zane Rogers
2019-09-06 21:52:44

Neil Ramsay
2019-09-06 21:53:20

Alexandre Belisle
2019-09-06 21:53:28

Stefan Ritchie
2019-09-06 22:00:39

Stefan Ritchie
2019-09-06 22:01:09

Stefan Ritchie
2019-09-06 22:01:40

Zane Rogers
2019-09-06 22:14:55

Zane Rogers
2019-09-06 22:14:57

Rafael Castrillón
2019-09-06 23:47:12

Rafael Castrillón
2019-09-07 00:32:37

Stefan Ritchie
2019-09-07 00:37:28

Stefan Ritchie
2019-09-07 00:38:11

Rafael Castrillón
2019-09-07 00:38:34

R.J. Cee
2019-09-07 00:47:10

Stefan Ritchie
2019-09-07 00:49:44

R.J. Cee
2019-09-07 00:55:53

R.J. Cee
2019-09-07 00:56:36

Stefan Ritchie
2019-09-07 00:57:29

Alan Precourt
2019-09-07 01:28:32

R.J. Cee
2019-09-07 02:45:57

Stefan Ritchie
2019-09-08 03:57:19

Roger Munguia
2020-01-06 14:40:25

Stefan Ritchie
2020-01-06 14:42:31

Roger Munguia
2020-01-06 17:30:13


原文網址 Massimiliano Bova
2019-09-06 17:14:01

Hi to all the members of the group.
I kindly ask for your help regarding this problem that you see in the picture.

_ I have a Photon Anycubic
_ I use the Anycubic Maroon resin
_ Chitubox as slicing software

These are the settings:
Exposure time: 14 sec
Exposure bottom layers: 60 sec
Bottom layers: 8 sec
Off time: 4.5 sec
SLice thickness: 0.025 mm

Maybe I'm wrong something in the size of the media ??

Work hours for nothing ... I'm a little frustrated
Please, who can help me?
Thank you!

翻譯年糕

Fred Steinmann
2019-09-06 17:35:35

Massimiliano Bova
2019-09-06 17:37:29

Fred Steinmann
2019-09-06 17:48:41

Tobias Helwing
2019-09-06 17:50:39

Massimiliano Bova
2019-09-06 17:51:07

Massimiliano Bova
2019-09-06 17:56:43

Irina Siman
2019-09-06 18:02:27

Rikard Weijmer
2019-09-06 19:32:48

Handrez Pintubola
2019-09-06 19:50:00

Ben Rawalt
2019-09-06 20:56:47

Scott Pavlich
2019-09-06 21:13:08

Stefan Giudici
2019-09-06 21:17:21

Massimiliano Bova
2019-09-06 22:49:17

Massimiliano Bova
2019-09-06 22:52:21

Massimiliano Bova
2019-09-06 22:55:24

Simão Costa
2019-09-06 23:00:00

Massimiliano Bova
2019-09-06 23:01:16

Rick Driftmyer
2019-09-07 00:32:39

Davoud Taghawi-Nejad
2019-09-07 00:40:31

Jan Kraak
2019-09-07 01:34:44

Massimiliano Bova
2019-09-07 01:39:25

Handrez Pintubola
2019-09-07 01:47:00

Herman Simpson
2019-09-07 03:08:17

Massimiliano Bova
2019-09-07 07:52:01

Massimiliano Bova
2019-09-07 15:12:36


 

討論主題

發文排行榜

回文排行榜

熱門關鍵字