• COSPLAY 3D 建模
  • #maker+t=market
  • 3D列印服務
  • 1
  • 2
  • 3

Anycubic Photon Printer Owners 造訪社團

原文網址 Tiago Lopes
2020-04-03 13:40:23

Those strips means my lcd is gone???

翻譯年糕

John Chrapkowski
2020-04-03 13:45:01

That looks more like a firnware/loose cable issue from what I’ve seen.

John Chrapkowski
2020-04-03 13:45:23

Bad lcd is usually spots on the screen

Ivan Adhi R
2020-04-03 13:49:16

John Chrapkowski mine looked just like this. turning on and off helped in several occassions. but eventually black spot appeared. so, still need to change LCD after all
and also, failed prints, wasted time and resin matters ?

John Chrapkowski
2020-04-03 13:51:00

Ivan Adhi R ahh. Sorry to hear that. I’ve seen a lot of posts where a firmware update fixed similar. Thanks for the info that it could be signs of future problems.

Ivan Adhi R
2020-04-03 13:54:31

John Chrapkowski might be firmware for photon john (4.2.18 is stable and some others causes issue)
never heard of firmware issues for photon s, atleast until now

John Chrapkowski
2020-04-03 13:55:22

Ivan Adhi R maybe I’m getting mixed up. You probably have more experience

Ivan Adhi R
2020-04-03 13:56:18

John Chrapkowski i have more problems on my machine to be honest

Bruno Shepard
2020-04-03 14:27:51

Ivan Adhi R did you found a way to fix your problems?

Ivan Adhi R
2020-04-03 14:51:08

Bruno Shepard most yes, this one in particular, No, not yet:My uv array wont light up now


原文網址 Hoghead Hoffer
2020-04-03 13:10:31

Looks like the Military finally purchased a Mech to protect Hofferton.

看來軍方終於買了一座mech來保護霍佛頓.

· 查看原文 · 為此翻譯評分


原文網址 Denis Wade
2020-04-03 11:13:27

Hey guys, I am looking at making a washing station, similar to the anycubic one .. I am after a magnetic fan so I can have the blades inside a tub and the motor outside it .. I am struggling to identify what they are actually called so I can find them on eBay or amazon .. can anyone assist

Thanks

翻譯年糕

John Chrapkowski
2020-04-03 11:16:59

Magnetic stirrer

Nipuna Gunarathne
2020-04-03 11:23:20

The anycubic one has a rotor with magnets mounted on a stepper


原文網址 Matthew W. Johnson
2020-04-03 10:10:47

Anyone have experence with elegoo's ABS like resin. Im looking for the best settings. I havent even opened my bottle yet. Anyone have experence with elegoo's ABS like resin. Im looking for the best settings. I havent even opened my bottle yet. 翻譯年糕

Brian King
2020-04-03 10:12:38

Gonna have to run resin exposure test.

Tom Howley
2020-04-03 10:52:51

I did struggle with it and ended up mixing it 1:2 with Elegoo translucent resin and using 10 second exposure time. I am sure someone will pop up and say what I did was wrong but it worked for me

Matthew Dickey
2020-04-03 11:01:04

I haven’t mixed mine, but I’m not impressed with the results so far. Just assumed I was doing something wrong. Glad to see I’m not alone.

Dominik Honke
2020-04-03 17:51:55

I use elegoo abs like grey at 60 base, 9-10 standard layer on first generation classic photon.


原文網址 Victoria Cordani
2020-04-03 10:08:25

I keep getting flat spots and random layer lines in my prints. Any ideas what could be causing it?

翻譯年糕

Fred Bey
2020-04-03 10:09:27

The hand and elbow are support issues.

Arthur White
2020-04-03 10:09:34

You have unsupported overhangs

Jairo Ledesma
2020-04-03 10:09:38

Can you show your supports

Victoria Cordani
2020-04-03 10:10:08

I also seem to be getting spots where the layers looks like they’re coming apart.

Arthur White
2020-04-03 10:10:18

Use The Photon Validator to make sure you don’t have overhangs

Victoria Cordani
2020-04-03 10:12:27

Victoria Cordani
2020-04-03 10:12:37

here is the spot I took a picture of

Victoria Cordani
2020-04-03 10:13:45

I can't get a clear picture on my phone of the layers separating in other spots. All 5 of the minis I had on the print bed had these flat spots

Ernest Sandridge Ill
2020-04-03 10:21:36

Following

Nikola Pijanac
2020-04-03 10:21:50

Thats probably just the support thats bone missing at some point. Its an easy repair, if you get some talcum powder and mix it with resin till its pasty like tooth paste use a 405nm uv light to cure it as you go. Very easy to build up layers then a bit of filing and sanding your good to go. You'd never know the model wasnt right. You can also use tissue paper and drip resin on it for fixing larger areas uv then add some mixed resin talcum powder and your models are fixed.

Danny Gonzalez
2020-04-03 11:36:30

Yeah I suspect your support failed. You can consider increasing your support diameter or increasing your exposure time if this is happening frequently.


原文網址 Josh Berkley
2020-04-03 10:06:10

Does anybody know if the vat in the wash/cute machine would hold up to acetone instead of IPA? Anyone try this? I ordered one which will hopefully arrive shortly, but recently switched to acetone due to the shortage. I love the way acetone works but don't want to ruin my new device.

翻譯年糕

罗西晟
2020-04-03 16:39:46

Acetone maybe not... But it's an easy comparative, if the fluid is held in "plastic" containers or only in glass containers.... that pretty much is a give-away...
If it's glass only containers, don't put it in.
If it's in plastic, you just need to figu re out what kind of plastic the container is.

(I know for a fact that the containers for Bleach are the same type of plastic you can use to keep gasoil/diesel in.... which you can not keep in Soda-bottles.)

Though I know for a fact that "methylated spirits" can be used to clean and can be put in the container for at least 4 weeks without issues.

Warning label on the lid does say something about ethyl alcohol.... (Ethanol)


原文網址 Thomas Roe
2020-04-03 09:21:52

I got this email from AnyCubic. Anyone else get one, and can verify authenticity?

我從任何立方體收到了這封電子郵件. 還有誰得到一個, 可以驗證真實性嗎?

· 查看原文 · 為此翻譯評分

Fernando Valenzuela
2020-04-03 09:24:17

It's legit. I got one last year but they were offering me the Mega I3. I did get it by the way.

Hugh Jeriolas
2020-04-03 09:27:28

I got a photon s that way

Robert Maefs
2020-04-03 09:28:32

Also got one, I’m impressed with their company

Thomas Roe
2020-04-03 09:31:22

Thanks!

Josh Norris
2020-04-03 09:32:26

hell i would be willing to give it a shot love my photon

Leo Bejarano
2020-04-03 09:39:10

free printer ?

Ryan Champion
2020-04-03 09:46:39

I never get emails offering me legitimate free stuff D:
Only princes offering me $ billions.

Thomas Roe
2020-04-03 09:51:08

Those Nigerian Princes hounding you again?

John Alvarado
2020-04-03 09:54:18

How does one get this free printer?

Colin Fotheringham
2020-04-03 09:54:52

Lance Turner
2020-04-03 09:56:01

I had gotten one for resin. Which after sending them a copy of my review of there 3d photon printer. I got a liter of grey resin in the mail.

Ernest Sandridge Ill
2020-04-03 09:57:38

I recently got one, for me to leave a review on their amazon.de page. Sadly through some language barrier, informed them I can only do .com market which they said was fine. Did so, I guess then it clicked on their end.
I am guessing I won't get that free 500ml resin for doing so.

Keith Yinger
2020-04-03 10:13:17

Maybe I should start buying my resin straight from anycubic instead of Amazon Prime. Only problem is by the time I finally got an email I probably would have spent a hundred bucks or so on the extra cost for the resin and the shipping.
It's $17.99 for 500ml of standard grey on Amazon with free shipping.
$24.99 from anycubic.
7 dollars more :(
I think I'll probably just stick with Amazon.

Telli Mantelli
2020-04-03 11:53:58

Mega Zero a nice little printer currently printing out face shield frames non stop!

Gregory Akin
2020-04-03 12:16:18

Dude I want to test printers. Nice man do it

Oscar H. Montes
2020-04-03 12:31:56

Telli Mantelli What STL are you using?

Andy Turtle Consiglio
2020-04-03 12:53:56

Lucky! I would love to get an fdm printer!

Andrew Short
2020-04-03 13:21:39

yeaaaa bro that email is bs

Michael Alexander Caddick
2020-04-03 14:19:29

Nice if it was real. Likelihood isn't high :)

Mathias D'hoore
2020-04-03 17:10:05

If you ordered on amazon.de, you can definitely leave english language reviews on .de!
I did so, and got my resin in the mail last week


原文網址 Ivan Adhi R
2020-04-03 09:14:10

Hi guys,
I've been printing with my photon s for half a year already, been spending around 10L of resin and printing hundreds of figures, minis, et al. (so i assume i know all the basics)
The problem is in past week i've been getting failed prints. Mostly because the UV array turned off mid prints. I've been getting only 1cm height of what's supposed to be 5-7cm prints
I changed LCD recently, but been getting several good prints before disaster strikes.
Last time i got this problem, it's due too loose cable.
But this one, cable is fine. Exposure test is okay. It just stopped printing after an hour or two.
Anyone experienced the same or has solution for this?
Is it because of overheating? Or my board is failing?
Thanks

翻譯年糕

Jim Appleby
2020-04-03 10:03:38

Is it possible your exhaust fan has failed and unit has overheated?

Ivan Adhi R
2020-04-03 10:07:01

Jim Appleby exhaust fan is running fine as well.
Should i opt for bigger ones?

Jim Appleby
2020-04-03 10:14:47

You mean the one that blows out the bottom or back of the case? Im not referring to the one where the vat is

Nikola Pijanac
2020-04-03 10:28:20

Check for a dry joint, it may not be obvious until the unit heats up. To check would be pretty easy, just do a dry run of a print and get a hair dryer if you have one handy and artificially bring up the heat and watch for errors. If it is a dry joint ( meaning solder isnt done properly) some where on your power circuit. Easy fix just heat up your soldering iron and touch a few of the places where the solder is to fix the dry joint. Which ever way you go it requires some fiddling. The easy way is to try to replace things but you may not fix anything it could be as simple as a dry joint on your wiring going to a plug.

Ivan Adhi R
2020-04-03 10:44:32

Jim Appleby mine is photon S. Exhaust is at the bottom. And that one is working fine. A little noise but i've put some lubricants

Ivan Adhi R
2020-04-03 10:46:36

Nikola Pijanac yeah i was thinking about this too. But afraid if i mess up. Not too handy with soldering iron.
I think replacing cable will be better too

Jim Appleby
2020-04-03 10:48:06

I also have the S, I opted for a larger one. In fact on thingiverse FTK has an excellent solution for venting fumes which includes an stl file to install a larger fan. I did follow his advice on the exhaust and works superbly

Jim Appleby
2020-04-03 10:52:33

the symtoms you are experiencing really has me believing it is overheating; just had a thought....your base is not modified therefore sits way too close to the ground thus the bottom fan has to work hard to exhaust the air. any chance you can elevate the base in such a way that air can flow out more freely?

Jim Appleby
2020-04-03 10:54:26

check this out - FTK - Anycubic Photon S - Modular Ventilation v3
by F-T-K October 09, 2019

Jim Appleby
2020-04-03 10:54:43

on thingiverse

Ivan Adhi R
2020-04-03 11:00:46

I also have an ender 5, thinking about printing elevated platform for my photon s, but now it's either under extruded or clogged.
I have to tinker 2 machine at the same time. What are the odds? ?
Did you get larger fans for you photon?
I was thinking of getting PC's 12cm fan. Is it compatible?

Ivan Adhi R
2020-04-03 11:01:38

Or maybe 20cm fan?

Jim Appleby
2020-04-03 11:06:27

the 120 mm PC fan is what I am using. FTK includes an adapter that can be printed so that you can remove the stock fan and replace it with the PC fan. Also if you do not elevate the four corners of the base the fan will still have more of a job getting the air out. poor design in my opinion.

Nikola Pijanac
2020-04-03 11:18:54

Ivan I understand, try replacing the cables do them one by one do a dry run and see how it goes make sure you have your hair dryer handy to heat it up. Dont replace too many cables at once just incase you fix one problem but introduce another one.

Ivan Adhi R
2020-04-03 13:58:22

Jim Appleby that's what i'm after. Thanks for the suggestion Jim.
But first, have to deal with the UV array. It wont light up even after a night's worth of 'cool down'

Ivan Adhi R
2020-04-03 14:01:11

Nikola Pijanac i'm thinking of particularly 2 cables (white and black) that went from the smaller boards to the UV array
Anycubic's tech support told me to check for voltage last time i had this issue. And it lighted up on multimeter's touch
But it wont light up now

I just wonder, am i the only one getting this issue in the whole group? ?

Nikola Pijanac
2020-04-03 14:09:18

Well if your multi meter isnt showing a reading it could very well be your power supply. Have you checked at the power supply if there is voltage? I know its a stupid thing to mention but the plug where you are powering from is there power there as wel l? Just as a note, I put in a power point close to my work bench so I can charge my tablet. It normally doesn't matter whether I have the black or brown left or right I plug things into the point and they work. Except my Samsung tablet, would not charge there, charges in other power points and not there. After some research some electronics will not work if power points are not properly/correctly wired to standard. Check if you have stable power, at the points, check if there is power from the supply inside the photon and keep checking from power input each cable until you see there is no feed. Keep going up the chain until you hit no power, you should uncover it pretty quickly where the fault is.

Ivan Adhi R
2020-04-03 14:56:36

Nikola Pijanac Everything lights up, the screen, those small leds, adapter light, z rod motor i even plug it to a ups. Everything is normal, everything except the uv array.

Voltage on the small board from what they told me is supposed to be 12v 24v out. Checked.
Now that it wont light up at all, i will check if the black and white cable in case it's not normal

Ivan Adhi R
2020-04-03 14:58:24

You know what's funny? Everytime the UV is dead and i disassemble it from the photon, it light up normally, put it back on, still normal, print again still normal at least for 1st hour. After that, dead

Nikola Pijanac
2020-04-03 16:08:02

That just sounds like a dry joint that is coming apart once it heats up!! Maybe change the black white wire going to it. Can you tell if the UV light soldered joints look solid?

Ivan Adhi R
2020-04-03 16:25:18

It looks solid, i'll send photos tonight.
But the cables are jammed and bent all over. Tight space indeed


原文網址 Mark A. Siefert
2020-04-03 08:55:34

OK... what type of Z-axis motor do I need to replace the one in my Photon.

翻譯年糕

Gary Slovinsky
2020-04-03 10:03:06

I believe its s standard nema 17.

Gary Slovinsky
2020-04-03 10:04:29

The Z motors are the same as FDM motors and low level CNCs.


原文網址 Scotty Wilkinson
2020-04-03 08:06:15

I accidentally short circuited the motherboard, would it be possible to replace the motherboard. are they sold seperately?

翻譯年糕

Jim Fuqua
2020-04-03 08:09:24

Yes, I had to replace mine. Look on Amazon


 

討論主題

發文排行榜

回文排行榜

熱門關鍵字