Anycubic Photon Printer Owners 造訪社團

原文網址 Mike Fatchett
2019-07-13 22:56:43

Here are a couple of prints I made of sword and board guard. The first print the bottom of the sword failed to print and the shield failed in some fashion. The next print I used a bunch of supports probably a few too many but good results. The first print I lowered the exposure time. Raised it to 8 seconds on the good attempt.

Does this figure really need supports or was the failure from low exposure? If supports are needed how many and where. I was thinking about cutting back to one or two on the shield and maybe one on the pommel of the sword? I failed to save the slice with the supports I used. Can you convert a photon file back to stl?

Do you normally remove the supports prior to final curing?

I have been printing with the base of the mini on the plate. If I choose auto supports the program wants to add a bunch of supports under the base is there a way to avoid that?

Thanks for the help!

翻譯年糕

Ludo Eksel
2019-07-13 23:03:48

Mike Fatchett
2019-07-13 23:06:09

Ludo Eksel
2019-07-13 23:07:41

Miguel Zavala
2019-07-13 23:48:58

Mike Fatchett
2019-07-14 01:59:37

Miguel Zavala
2019-07-14 02:01:45

Mike Fatchett
2019-07-14 02:39:33

Mike Fatchett
2019-07-14 02:44:17

Mike Fatchett
2019-07-14 02:44:32

Mike Fatchett
2019-07-14 02:47:37

Miguel Zavala
2019-07-14 03:37:50

Jean-François Meloche
2019-07-14 23:43:30

原文網址 Lawrence Valenza
2019-07-13 22:51:58

Is there any data on how light fast the resin colors are over time? Concerned about fading. Is there any data on how light fast the resin colors are over time? Concerned about fading. 翻譯年糕

Tomas Salo
2019-07-13 22:58:50

John Lowry
2019-07-13 23:08:15

Richard Shapiro
2019-07-14 00:39:55

原文網址 Rainer Hummelsbeck
2019-07-13 22:21:13

Faery Dragon from Rocket Pig Games . This mini printed support-free and though I never really minded supports it is quite nice not to worry about placing and cleaning them up at all....

翻譯年糕

Mike Mchughes
2019-07-14 00:53:49

Rainer Hummelsbeck
2019-07-14 02:23:30

Mike Mchughes
2019-07-14 02:29:48

Mike Mchughes
2019-07-14 02:30:14

Mike Mchughes
2019-07-14 02:31:38

Mike Mchughes
2019-07-14 02:33:38

Rainer Hummelsbeck
2019-07-14 02:34:33

Mike Mchughes
2019-07-14 02:35:12

Susan Sioux Mercer
2019-07-14 08:13:30

原文網址 Arcelius Scott III
2019-07-13 22:10:35

Sooo, heavy supports was a mistake, never again. Ruined the print. They’re brutal to remove ugh

翻譯年糕

Chasen Harris
2019-07-13 22:12:08

Arcelius Scott III
2019-07-13 22:14:03

Richard Zeinner
2019-07-13 22:14:06

Arcelius Scott III
2019-07-13 22:14:37

John Smith
2019-07-13 22:15:32

Richard Flanagan
2019-07-13 22:17:06

Sławek Wojtysiak
2019-07-13 22:20:07

Arcelius Scott III
2019-07-13 22:26:28

Arcelius Scott III
2019-07-13 22:27:19

Mark Wardle
2019-07-13 22:29:06

Mark Wardle
2019-07-13 22:30:50

Paul West
2019-07-13 22:32:30

Sławek Wojtysiak
2019-07-13 22:35:54

Stefan Giudici
2019-07-13 22:39:08

Troy Tepes
2019-07-13 22:45:15

Mark Wardle
2019-07-13 22:49:23

Muhammad Zulkhairol Yacob
2019-07-13 22:50:08

Justin Miller
2019-07-13 23:04:38

Michael J Morris
2019-07-13 23:05:42

Justin Miller
2019-07-13 23:12:32

Arcelius Scott III
2019-07-13 23:22:18

Muhammad Zulkhairol Yacob
2019-07-13 23:27:03

Chris Bruce
2019-07-13 23:48:23

Travis McGeathy
2019-07-14 00:17:37

Sam Cunningham
2019-07-14 04:00:12

James Cachia-Garrett
2019-07-14 05:07:35

Mark Wardle
2019-07-14 05:10:59

Carlos Aguilar
2019-07-14 23:35:31

原文網址 Angela Snyder
2019-07-13 21:45:37

Thought I would share my UV box idea.

Aluminum small trash can (foot pedal operated, easy to put models in without touching the outside and potentially getting resin/IPA on it) + UV light strands and some aluminum foil for the bottom.

I do plan on printing a translucent stand on my FDM printers to bring models up to the middle section (I'll be dealing mostly with 28mm models).

Enjoy the wacky idea lol.

我想我會分享我的紫外線盒的想法.

鋁小型垃圾桶(腳踏板操作, 很容易放入模型而不接觸外部, 可能會獲得樹脂/ ipa) +紫外線和底部的鋁葉子.

我確實計劃在我的fdm印表機上列印一個半透明支架, 將模特帶到中間部分(我將主要處理28毫米型號).

享受這個奇怪的想法, 哈哈.

· 查看原文 · 為此翻譯評分

Gavin Paull
2019-07-13 21:53:06

Angela Snyder
2019-07-13 22:01:17

Chris Miller
2019-07-13 22:01:26

Angela Snyder
2019-07-13 22:08:21

Niklas Landin
2019-07-13 22:08:26

Angela Snyder
2019-07-13 22:09:08

Niklas Landin
2019-07-13 22:11:38

Angela Snyder
2019-07-13 22:12:33

Steve Smith
2019-07-13 22:18:53

Angela Snyder
2019-07-13 22:37:26

Mike Fatchett
2019-07-13 23:02:48

Angela Snyder
2019-07-13 23:13:08

Ben Cox
2019-07-13 23:27:08

Angela Snyder
2019-07-13 23:29:25

Ben Cox
2019-07-13 23:37:29

原文網址 Angela Snyder
2019-07-13 21:38:09

Get build plate completely level, successful test print of the cube, put on gloves (not used to working in gloves AT ALL), dropped built plate in the IPA bin before I scraped the model off the plate........... cube lost a corner .

Its no longer level. Looks like I'm printing another cube.........

# LearningProcess
# Themoreyouknow

翻譯年糕

原文網址 Mike Raines
2019-07-13 21:00:31

Just got mine and wow test print out the box sweet..
So if I want to print this will I need supports etc tia

翻譯年糕

Steve Nottingham
2019-07-13 21:06:41

Kevin Lems
2019-07-13 21:09:02

Jason Mayer
2019-07-13 21:18:46

Kevin Lems
2019-07-13 21:22:10

Chris Wood
2019-07-13 21:36:36

Chad Elstad
2019-07-13 21:39:46

Hattha Souvenir
2019-07-13 22:42:10

原文網址 Michael Saxton
2019-07-13 20:36:54

Yesterday my Photon arrived. I have been printing with FDM printers for years but this is my first resin printer and it's all new to me. Last night I pulled it out of the box and immediately installed a 4" adapter with an exhaust fan into a carbon filter. Hopefully that will eliminate any odor issues out of the gate since my print table sits below my kids rooms.

I am about to go level it and try some test prints. What I am really looking for is post printing steps. I currently don't have an ultrasonic cleaner or any UV lights. I have a bunch of IPA (about 6 bottles) so I can clean them with that for now. I also have a couple bottles of mean green that lately I have seen some videos claiming that it works much better than IPA.

So just so I am clean, what are my post-print steps? Clean print in IPA or Mean Green, rinse in (water?), and for today I will put them out in the sun for curing (15 mins?).

I will probably be picking up an ultrasonic cleaner for ease of use but I might go grab a couple of those Sistema Pickle jars for now. Also any examples of a cheap UV setup would be great.

Lastly, regardless of what I use to clean off excess resin, how often do you guys replace it? If I am washing prints in a pickle jar with IPA, how often do I replace that IPA?

翻譯年糕

Kevin Lems
2019-07-13 20:38:02

Michael Saxton
2019-07-13 20:41:03

Mirosław Pacyna
2019-07-13 21:02:23

Michael Martin
2019-07-13 21:06:49

Mirosław Pacyna
2019-07-13 21:09:49

Kris Occur
2019-07-13 21:10:41

Bob Heron
2019-07-13 21:22:18

Michael Martin
2019-07-13 21:31:18

Sargon Smith
2019-07-13 21:36:16

Mirosław Pacyna
2019-07-13 21:36:19

Nick Wells
2019-07-13 21:56:26

Ben Cox
2019-07-13 22:39:33

Bobby Bonner
2019-07-13 23:54:42

Michael Saxton
2019-07-14 01:21:48

Michael Saxton
2019-07-14 01:27:09

Michael Saxton
2019-07-14 01:29:18

Michael Saxton
2019-07-14 01:42:20

Kris Occur
2019-07-14 02:21:01

Matthew Cress
2019-07-14 02:49:32

Mirosław Pacyna
2019-07-14 02:59:52

Mirosław Pacyna
2019-07-14 03:01:11

Matthew Cress
2019-07-14 03:02:16

Mirosław Pacyna
2019-07-14 03:06:19

Carlos Aguilar
2019-07-16 07:22:56

原文網址 Sjef Blaster
2019-07-13 20:23:55

Printed this delicate Newborn Alien, still learning about the supports :) next time I will probably print it bigger, the fingers and toes are very fragile, and me being clumsy broke them when removing support material. Model is here: https://www.cgtrader.com/3d-print-models/miniatures/sci-fi/alien-resurrection-newborn-statue 翻譯年糕