Anycubic Photon Printer Owners 造訪社團

原文網址 Gustaf Sjögren
2019-08-29 23:54:48

This a kind warning for people who keep overfilling their vats. If you're filling past the bottom part of the attachment the build platform is screwed onto then you'll most likely get failed prints or worse.

Resin can enter the space between the attachment and build platform, eventually climbing and lubricating the screws. (Google "Capillary Action" for understanding how liquids can climb enclosed spaces.)

There's good possibility of resin reaching the ball bearing keeping your build platform fastened in place. This will cause the build plate to start moving during prints; which, at a minimum, causes failed prints and in worse cases damages or destroys your FEP's and/or screens.

If you do need to overfill the vat for a large print, start the print and add resin when the platform has risen a bit - leaving plenty of room for additional resin.

Credit: Picture borrowed from another forum. Note the resin sitting onto platform screws.

EDIT: Reworded it. Thanks for Nick Williams for the tip.

翻譯年糕

Will Koehler
2019-08-29 23:56:27

Gustaf Sjögren
2019-08-29 23:57:33

Dustin Scott
2019-08-29 23:59:34

Gustaf Sjögren
2019-08-30 00:00:43

Takeo Kurita
2019-08-30 00:01:21

Gustaf Sjögren
2019-08-30 00:02:36

Steve Ludwig
2019-08-30 00:02:38

Gustaf Sjögren
2019-08-30 00:03:30

Sal Jusufovic
2019-08-30 00:03:33

Takeo Kurita
2019-08-30 00:05:20

Blaine Tsukayama
2019-08-30 00:06:42

Juan Perez
2019-08-30 00:08:08

Mohammad Jdeed
2019-08-30 00:08:21

Winup McModels
2019-08-30 00:11:02

Sakis Goumenidis
2019-08-30 00:11:30

Alex Vee
2019-08-30 00:11:34

Paul Mabbott
2019-08-30 00:11:38

Sen Kun
2019-08-30 00:13:00

Sen Kun
2019-08-30 00:13:37

Nickolaus Oneal
2019-08-30 00:13:40

Jared Zadorozny
2019-08-30 00:13:41

Neil Ramsay
2019-08-30 00:15:34

Adam Green
2019-08-30 00:16:32

Neil Ramsay
2019-08-30 00:16:34

Scott Conn
2019-08-30 00:17:51

Alex Vee
2019-08-30 00:18:01

Andrew Sutherland
2019-08-30 00:18:11

Ben Rawalt
2019-08-30 00:22:35

Jared Zadorozny
2019-08-30 00:23:22

David Doyle
2019-08-30 00:23:53

Jared Zadorozny
2019-08-30 00:25:07

Michael Szita
2019-08-30 00:25:40

Neil Ramsay
2019-08-30 00:26:11

Chase Wichert
2019-08-30 00:26:20

Ian Payne
2019-08-30 00:28:24

Karl Grunthal
2019-08-30 00:37:58

Nick Williams
2019-08-30 00:38:52

Tim Moulton
2019-08-30 00:39:51

Nick Williams
2019-08-30 00:41:46

Adam Sibille
2019-08-30 00:56:30

Bruno Baronet
2019-08-30 00:58:28

Will Koehler
2019-08-30 00:58:49

Gustaf Sjögren
2019-08-30 01:00:55

Gustaf Sjögren
2019-08-30 01:01:20

Anthony Van Hamond
2019-08-30 01:04:02

Nick Williams
2019-08-30 01:05:20

Gustaf Sjögren
2019-08-30 01:07:28

Jan Čulik
2019-08-30 01:09:07

Lauri Ruutu
2019-08-30 01:09:32

Nick Williams
2019-08-30 01:09:38

Gustaf Sjögren
2019-08-30 01:11:00

Robert Mako Sharkey
2019-08-30 01:11:03

Glenn Mcfadden
2019-08-30 01:15:34

Nick Williams
2019-08-30 01:16:14

Gustaf Sjögren
2019-08-30 01:17:30

Gustaf Sjögren
2019-08-30 01:17:42

Nick Williams
2019-08-30 01:18:02

Lauri Ruutu
2019-08-30 01:20:35

Gustaf Sjögren
2019-08-30 01:23:17

Darren Donovan
2019-08-30 01:26:22

Gustaf Sjögren
2019-08-30 01:26:54

Steve Furnival
2019-08-30 01:27:15

Baptiste Arnault
2019-08-30 01:28:15

Baptiste Arnault
2019-08-30 01:32:41

Gustaf Sjögren
2019-08-30 01:34:07

Robert Mako Sharkey
2019-08-30 01:34:09

Gustaf Sjögren
2019-08-30 01:34:42

Toby Kirkby
2019-08-30 02:08:34

Gabriel Marian Alfons
2019-08-30 02:10:02

Patrick Smith
2019-08-30 02:10:23

Richard James Sanchez
2019-08-30 02:18:43

Mark O'Keefe
2019-08-30 02:20:51

Andrew Nally
2019-08-30 02:23:20

Robert Mako Sharkey
2019-08-30 02:28:00

Chasen Harris
2019-08-30 02:28:19

Mack Whillz
2019-08-30 02:30:20

Gustaf Sjögren
2019-08-30 02:34:03

Anthony Van Hamond
2019-08-30 02:36:17

Robert Mako Sharkey
2019-08-30 02:36:42

Gustaf Sjögren
2019-08-30 02:37:40

Baptiste Arnault
2019-08-30 02:45:17

Robert Mako Sharkey
2019-08-30 02:49:56

Nick Williams
2019-08-30 02:51:22

Chasen Harris
2019-08-30 02:55:51

Robert Mako Sharkey
2019-08-30 03:07:15

Nick Williams
2019-08-30 03:27:51

Joe Broggio
2019-08-30 03:30:45

Joe Broggio
2019-08-30 03:31:59

Steven Raybell
2019-08-30 04:36:04

Fred Breton
2019-08-30 04:41:25

Darren Donovan
2019-08-30 04:42:28

Darren Donovan
2019-08-30 04:45:08

Gustaf Sjögren
2019-08-30 04:57:42

Adam Aleksander Nowicki
2019-08-30 05:29:35

Alex Vee
2019-08-30 05:33:32

Adam Aleksander Nowicki
2019-08-30 05:36:04

Alex Vee
2019-08-30 05:43:32

Nicholas Storms
2019-08-30 06:39:22

Seona van der Pol
2019-08-30 07:56:45

Jason Glavich
2019-08-30 08:34:35

James Hendrix
2019-08-30 08:45:31

Mike Roof
2019-08-30 10:12:03

Mike Fatchett
2019-08-30 10:41:58

Rick Gonzales
2019-08-30 11:29:05

Peter Jarvie
2019-08-30 13:39:55

Tom Sargison
2019-08-30 15:06:20

Robert Mako Sharkey
2019-08-30 16:29:22

Ari Isaacs
2019-08-30 19:24:38

Sercan Güzel
2019-08-30 19:28:40

Alex Vee
2019-08-30 19:42:19

Chris D'Andrea
2019-08-30 20:55:35

Bill Connelly
2019-08-30 21:01:12

Joe Papa Behre Behrend
2019-08-30 21:23:34

Joe Papa Behre Behrend
2019-08-30 21:24:11

Krystian Firla
2019-08-31 17:12:17

Alex Vee
2019-08-31 17:25:15

Steven Raybell
2019-08-31 17:46:33

原文網址 Zane Rogers
2019-08-29 23:52:25

First print of the anycubic photon. Decided to clean it up and give it some silver to bring out the details :)

翻譯年糕

Travis Kirlin
2019-08-30 00:06:09

Garret Bertrand
2019-08-30 00:09:29

Zane Rogers
2019-08-30 00:10:12

Pierre Tocqueville
2019-08-30 00:17:44

Zane Rogers
2019-08-30 00:20:35

Pierre Tocqueville
2019-08-30 00:21:52

Zane Rogers
2019-08-30 00:22:24

Thor Eppler
2019-08-30 00:51:19

Neil Ramsay
2019-08-30 00:54:48

Zane Rogers
2019-08-30 00:59:01

Zane Rogers
2019-08-30 00:59:43

Keif Davies
2019-08-30 01:03:20

Mark Davis
2019-08-30 01:17:41

Zane Rogers
2019-08-30 01:21:12

Zane Rogers
2019-08-30 02:15:29

Keif Davies
2019-08-30 02:23:25

Ryan Myers
2019-08-30 02:46:17

Zane Rogers
2019-08-30 02:50:44

Keif Davies
2019-08-30 02:51:37

Jeff Slaughter
2019-08-30 03:04:26

Zane Rogers
2019-08-30 03:11:43

Fred Breton
2019-08-30 07:15:51

Ryan Myers
2019-08-30 07:17:12

Fred Breton
2019-08-30 07:17:36

Ryan Myers
2019-08-30 07:20:48

Fred Breton
2019-08-30 07:23:30

Ryan Risley
2019-08-30 10:25:41

Zane Rogers
2019-08-30 10:27:43

Lee Baxter
2019-08-30 11:28:35

Jeff Slaughter
2019-08-30 11:31:04

Zane Rogers
2019-08-30 11:31:50

Jeff Slaughter
2019-08-30 11:37:44

Tim Richter
2019-08-30 12:59:53

Sam Davey
2019-08-30 14:12:08

Jason Turner
2019-08-30 18:30:57

Nina Loi
2019-08-30 19:50:31

Tom Calvin
2019-08-31 04:16:40

Zane Rogers
2019-08-31 04:31:20

Chris Gough
2019-08-31 06:53:15

Zane Rogers
2019-08-31 06:54:01

Tom Calvin
2019-08-31 06:55:14

Zane Rogers
2019-08-31 06:57:02

이이정인
2019-08-31 15:20:29

Robert O Donoghue
2019-08-31 17:18:16

Zane Rogers
2019-08-31 22:04:15

Zane Rogers
2019-08-31 22:05:12

Robert O Donoghue
2019-09-01 00:07:18

Zane Rogers
2019-09-01 00:49:27

Robert O Donoghue
2019-09-01 00:52:59

Tom Calvin
2019-09-02 02:47:57

原文網址 Lucas Neñer
2019-08-29 23:17:28

a simple uv curing box. i power it with the same 12v supply from the photon

翻譯年糕

Stephen Carr
2019-08-29 23:30:16

Michal Powierza
2019-08-29 23:45:38

Josh Thomas
2019-08-30 00:00:37

Lucas Neñer
2019-08-30 00:11:36

Lucas Neñer
2019-08-30 00:11:57

Josh Thomas
2019-08-30 00:18:17

Lucas Neñer
2019-08-30 00:23:32

Josh Thomas
2019-08-30 00:29:29

Michael Steadham
2019-08-30 00:47:57

Lucas Neñer
2019-08-30 01:15:04

Lucas Neñer
2019-08-30 01:16:00

Lucas Neñer
2019-08-30 01:16:34

Lucas Neñer
2019-08-30 01:20:31

Lucas Neñer
2019-08-30 01:33:57

Fernando Perez
2019-08-30 02:54:44

Lucas Neñer
2019-08-30 03:06:27

Josh Thomas
2019-08-30 03:12:31

Ric Watts
2019-08-30 07:59:00

Lucas Neñer
2019-08-30 08:01:29

Lee Baxter
2019-08-30 14:43:28

Mike McCreery
2019-08-30 20:20:27

Lucas Neñer
2019-08-30 20:34:33

Mike McCreery
2019-08-30 20:34:58

Fernando Perez
2019-08-31 01:31:23

Lucas Neñer
2019-08-31 06:23:49

Fernando Perez
2019-08-31 22:01:16

原文網址 Florian Helmer
2019-08-29 23:05:42

Hi guys, i just joined the group because i received my new photon S yesterday.

Sadly the first thing i noticed was that anycubic apparently doesnt provide information on the new file extension .pws. which locks third party programs out from working

Is there really now workaround for this or any good third party software to use currently?

If not I'm actually thinking of sending the printer back, as this makes it almost unusable for me.

The Software from Anycubic, in my opinion, is miserable especially regarding support settings and handling

I also just opened this ticket below...

"Hello,

i just bought the photon S and immediately upgraded the firmware as any customer should do.

So then i tested a bit and found out that the support configuration and other settings are miserable in your slicer software compared to for example chitubox.

Compare the auto support from your slicer with the chitubox slicer, its a massive difference. Also there is no hollow option in your slicer.

So i installed it and found out that you don't share information about your pws file extension, preventing your customers to use third party software.

Conclusion is, that I'm thinking about sending the printer back - because it is almost unusable with your standard slicer.

What will you do in the future (and by that i mean fairly soon)? your whole community basically doesn't upgrade the firmware or doesn't buy the new photon S because they fear that they cant use the chitubox or other 3rd party slicers anymore.

This is ridiculous and non-friendly to your customers.

Waiting for a reply, before thinking about purchasing a competitor printer and sending this one back.

Best regards,

Florian"

翻譯年糕

Gareth Williams
2019-08-30 05:51:55

Florian Helmer
2019-08-30 05:53:11

原文網址 Andris Drulle
2019-08-29 22:51:15

Just wanted to share some info regarding photon screen wearing out. Before order new screen double check is it vent at bottom working. I had all symtoms that screen is dead but actually that vent at bottom was dead and due to screen overheat it started to work incorrectly. Fix is easy, such vent you may buy in any electronic spare parts store. 60x60x10mm , 12V DC.

翻譯年糕

Iñigo Sordo
2019-08-29 23:11:58

Arnie Locsin
2019-08-29 23:13:51

Eric Wilfreesboro
2019-08-29 23:30:37

Anh Hoàng
2019-08-30 15:02:36

原文網址 Clayton Parker
2019-08-29 22:29:38

Doing a little Eco Resin Test Printing! So far so good... loving these colors!

翻譯年糕

Sean Croteau
2019-08-29 22:31:10

Garret Bertrand
2019-08-30 00:12:31

Darren Reckner
2019-08-30 00:57:18

Gabriele Mastrogiovanni
2019-08-30 01:50:00

Clayton Parker
2019-08-30 02:33:35

Carlos De la Rocha
2019-08-30 02:56:34

Pauline Mans
2019-08-30 04:48:06

Clayton Parker
2019-08-30 05:22:19

Clayton Parker
2019-08-30 05:27:54

Gabi Ras
2019-08-30 09:28:56

Clayton Parker
2019-08-30 09:29:36

Gabi Ras
2019-08-30 09:41:33

Clayton Parker
2019-08-30 09:54:22

Oscar Padilla
2019-08-30 09:55:08

Yamil Hugo Corco
2019-08-30 10:01:51

Pauline Mans
2019-08-30 16:23:03

Oscar Padilla
2019-08-30 21:39:52

Oscar Padilla
2019-08-30 21:41:49

Pauline Mans
2019-08-30 21:53:19

Stephanie Diaz
2019-11-23 01:26:05

原文網址 Zane Rogers
2019-08-29 22:21:38

Saw the photon on sale for $250 the other day so I snagged one. Printed my water dragon design at .05mm layer height with their anycubic green :) . First print out the gate and I'm fairly impressed.

翻譯年糕